Boot Hill
---------


From: "Alex Yeckley" <ayeckley@elektronforge.com>
Newsgroups: rec.games.video.arcade.collecting
Subject: Re: Pinouts for Midway Boot Hill
Date: Wed, 17 Dec 2003 17:54:17 EST


> Does anyone have the pinouts for the Boot Hill mainboard? Specifically
> I'm interested in the edge connector pinouts.  All I've been able to
> find are the dip switch settings.  Any info would be appreciated.

PIN 1:  +5VDC
PIN 2:  +5VDC
PIN 3:  +12VDC
PIN 4:  +12VDC
PIN 5:  -5VDC
PIN 6:  No connection
PIN 7:  Key
PIN 8:  GROUND
PIN 9:  GROUND
PIN 10:  RESET (momentary connection to ground w/ pullup req'd)
PIN 11:  No connection
PIN 12:  No connection
PIN 13:  No connection
PIN 14:  GROUND
PIN 15:  GROUND
PIN 16:  GROUND
PIN 17:  VIDEO GROUND
PIN 18:  COMPOSITE VIDEO

Alex
----
ayeckley@elektronforge.com
www.elektronforge.com




Coins                           SW.1    SW.2
-----------------------------------------------
1 COIN   -   1 PLAYER           ON      ON
2 COINS  -   2 PLAYERS
1 COIN   -   1 PLAYER           OFF     ON
1 COIN   -   2 PLAYERS
2 COINS  -   1 PLAYER           OFF     OFF
2 COINS  -   2 PLAYERS
2 COINS  -   1 PLAYER           ON      OFF
4 COINS  -   2 PLAYERS

Time                            SW.3    SW.4
-----------------------------------------------
60 SECONDS                      ON      ON
70 SECONDS                      OFF     ON
80 SECONDS                      ON      OFF
90 SECONDS                      OFF     OFF

Mode                            SW.5
-----------------------------------------------
TEST (RAM/ROM)                  OFF
PLAY                            ON


NOTE: SWITCHES 6, 7 AND 8 MUST BE IN "OFF" POSITION.


